Wns 10 tons/hour pharmaceutical industry steam boiler

WNS series gas-fired (oil-fired) steam boilerSteamProduct thermal capacity:1-20 t/hWorking pressure:0.7-2 MpaAvailable fuel:Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc.Available industries:Heat supplying, chemical, food, textile, printing and dyeing, cigarettes an

Featured Products

WNS series gas-fired (oil-fired) steam boiler

Wns 10 Tons/ Hour Steam Boiler for Pharmaceutical Industry
Steam
Product thermal capacity:1-20 t/h
Working pressure:0.7-2 Mpa
Available fuel:Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc.
Available industries:Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc.
 
ModelRated steam capacity(t/h)Rated working pressure(Mpa)Rated steam temperature(ºC)
WNS1-0.7-Y(Q)10.7170
WNS1-1.0-Y(Q)11184
WNS1.5-1.0-Y(Q) 1.51184
WNS1.5-1.25-Y(Q)1.51.25194
WNS2-1.0-Y(Q) 21184
WNS2-1.25-Y(Q)21.25194
WNS3-1.0-Y(Q)31184
WNS3-1.25-Y(Q)31.25194
WNS4-1.25-Y(Q)41.25194
WNS4-1.6-Y(Q)41.6204
WNS5-1.25-Y(Q)51.25194
WNS5-1.6-Y(Q)51.6204
WNS6-1.25-Y(Q)61.25194
WNS6-1.6-Y(Q)61.6204
WNS8-1.25-Y(Q)81.25194
WNS8-1.6-Y(Q)81.6204
WNS10-1.25-Y(Q)101.25194
WNS10-1.6-Y(Q)101.6204
WNS15-1.25-Y(Q)151.25194
WNS15-1.6-Y(Q)151.6204
WNS20-1.25-Y(Q)201.25194
WNS20-1.6-Y(Q)201.6204


Introduction
 

WNS series horizontal internal combustion boiler is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.


Technical advantages
 
Digitized manufacture
  • The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
  • The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.

Easy operation and maintenance
  • Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.

Longer working life
  • Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life. 

  • Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.

  • Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.

  • Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.

Less fuel consumption
  • High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45ºC to control heat lost.

  • Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.

  • Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water's temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.


Wns 10 Tons/ Hour Steam Boiler for Pharmaceutical Industry
Wns 10 Tons/ Hour Steam Boiler for Pharmaceutical Industry
Wns 10 Tons/ Hour Steam Boiler for Pharmaceutical Industry
Wns 10 Tons/ Hour Steam Boiler for Pharmaceutical Industry
Wns 10 Tons/ Hour Steam Boiler for Pharmaceutical Industry
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours