Hot Water High Pressure Boiler Feed Water Pump
Brief introduction
Hot Water High Pressure Boiler Feed Water Pump is an efficient and energy-saving product designed for the new series of industrial steam boiler pumps. This series of pump mainly used for conveying water free of solid particles with the temperature is less than 160°C or physical and chemical properties similar to liquid water.
Features
1. Hot Water High Pressure Boiler Feed Water Pump is not only for medium and low pressure boilers, but also for factories and cities installing & repairing is very convenient etc.
2. Hot Water High Pressure Boiler Feed Water Pump has been innovated on the basis of the traditional forms, abandoning the axial force balancing structure of the multistage centrifugal. Since having no balancing device, there exists none disk friction losses nor balancing return losses,the pump efficiency has been increased by 5-14% than the same category multistage pumps.
2. Hot Water High Pressure Boiler Feed Water Pump has been innovated on the basis of the traditional forms, abandoning the axial force balancing structure of the multistage centrifugal. Since having no balancing device, there exists none disk friction losses nor balancing return losses,the pump efficiency has been increased by 5-14% than the same category multistage pumps.
Pump picture
The picture is one DG type water pump with motor and common base
Structure diagram
| 1.Coupling assembly | 4.mechanical seal | 7. Wear ring | 10.Diffuser | 13.Balance Sleeve |
| 2.Shaft | 5.Tie bolt | 8. Inter-stage Bushing | 11.Stage Casing | 14.Balance Palte |
| 3.Bearing | 6.Suction Casing | 9.Impeller | 12. Delivery Casing | 15.Balance DIsk |
Hot Water High Pressure Boiler Feed Water Pump Application
1. Boiler water supply and discharge in high-rising building
2. Fire water supply in constructions
3. Water supply and discharge in factories and mines
4. Long distance delivery 
